Plow Blades

The JOMA 6000 is at Burke Truck!! Burke Truck is the only Wisconsin dealer of Burke Bushing Blades and BlackCat Joma Blades! 

Shielded Carbide Blades

  • 3/4" x 6" Carbide Blade sections offered in 3 foot and 4 foot. These blades have a 1/4" x 2" shield welded to the blade right in front of the carbide chip. This shield protects and helps to eliminate impact fractures of the carbide chip. Got gravel stuck in between Carbide and Cover? You won't have that problem with the Shielded Carbide Blades.

Burke Bushing Blade ('SnoShock', US6922924)

  • 7/8" x 6" Shielded Carbide Blades with 3" Poly Bushings at each mounting bolt. Bushing Blades are offered in 3' and 4' sections. The Bushing Blade will drastically reduce noise and vibration on truck and driver. The Bushing Blade's 0.760" 'Tall Bullnose' Carbide insert extends the life of these blades. Bushing Blades can also be manufactured in 2 foot sections.

Tungsten Carbide Inserts

  • Black Cat Tungsten Carbide Inserted Blades are manufactured using the best quality sintered carbide inserts available. They are brazed into a milled slot in the wearing edge of the blade. You may find Black Cat Carbide Inserts to be larger than popular competitors carbides. Longer blade life and less downtime.

Cover Plates

  • Cover Plates are installed in front of a standard carbide blade, and they offer protection of the carbide chips from impact. 1/2" x 6" hardened steel, the cover plates are offered in 8', 9', 10', 11' and 12' lengths to cover any plow blade setup with 'standard highway punch' hole pattern.

Joma6000 Plow Blades

  • 7/8" x 6" Rubber Blades with Carbide Sections inside. The soft rubber forms to contour of the road surface, the 0.955" tall carbide chip offers a much longer wear life compared to all other carbide blades. The BlackCat Joma Blades are offered in 3' and 4' sections. Mounting straps are always included in our price.

1-1/2" x 10" & 1-1/2" x 8" Rubber Blades

  • 2500psi Tensile Strength offered with or without slotted holes, cut to any length. Squeegee that driveway or parking lot without the worry of damaging the surface. Available in 1-1/2" x 8" rubber, and 1-1/2" x 10" rubber with no holes, cut to length. And we also offer the 1-1/2'" x 10" rubber in 11' and 12' lengths with slotted holes for 'standard highway punch'. Slotted holes allow precise adjustability for crowned roads, also gives you an option for more overhang, or less overhang to tackle either a wet slushy mess or a cold hard-packed snowfall. Other sizes and hole punch patterns are available by special order.

1" x 6" Through Hardened Blades

  • Replace that old blade for less than half the cost of carbide blades, 'Through Hardened' Blades are heat treated to 45-52 Rockwell hardness. These Blades have become very popular in the private contractor market. We currently offer them in 11' and 12' lengths, in 'standard highway punch'. Other size and hole punch patterns are available by special order.

Small Plow And Other Blades

  • Plow Blades
  • Grader Blades 
  • Underbody / Belly Blades
  • Carbide Insert Blades
  • Carbide Embedded Blades
  • Sno-Way Plow Cutting Edge
  • Western Plow Blades
  • Carbide Underbody / Belly Scraper Blades
  • Heavy-Duty Carbide Underbody Blades
  • Loader Blades
  • Construction Blades