Plows

Burke - 11-ft x 42-inch-high plow 

• 10-gauge broke (not rolled) moldboard (requires less plowing effort)
• 8 vertical ribs
• 5-hinge points
• 1-inch-thick turntable
• 4" x 20" reversing cylinders with 2-inch rods and cushioned ends
• Patented level lift with a maximum height difference of 1 1/2 inches tip-to-tip at full turn
• Trip edge or trip moldboard
• Carbide or Joma blades optional
• Other plow sizes and options available

Burke Road Tamer 2000 11-ft x 42-inch-high plow (not pictured)

• 7-gauge broke moldboard (not rolled) moldboard (requires less plowing effort)
• 8 vertical ribs
• 5 hinge points with Patented rubber table bushings
• 38 degree turning angle (not standard 35( turning angle)
• Trip edge or trip moldboard
• Carbide or Joma blades optional
• Other plow sizes and options available

Wings

Burke 9-ft Wing

• 10-gauge tapered broke (not rolled) moldboard (requires less plowing effort)
• Patented "A" frame lift - Clears the hood w/o Side shifting.
• Trip edge
• 4 x 20 heel lift cylinder
• 4 x 10 toe lift cylinder
• Carbide or Joma blades optional
• Other wing sizes and options available

Dump Bodies

1. 5-yard 409SS Stainless Steel Dump Body (pictured on the right)

• Uni-body design (no crossmembers) (for easy cleaning & lower mounting)
• Class 50 underbody hoist
• 8-inch I-beam long members (not formed)
• 24-inch sides / 36-inch head / 32-inch tailgate
• One-piece 3/16-inch AR400 floor
• 10-gauge sides and headsheat
• 10-gauge one-piece tailgate
• Other dump bodies and options available

 6-yard 304SS Stainless Steel Multi-Body (2nd picture on the right)

• Uni-body design Telescopic, trunnion-mounted hoist
• 12-inch-long members are one-piece and continuous-welded to the floor and sides
• 36-inch sides / 48-inch tailgate
• One-piece 3/16-inch AR400 floor
• 7-gauge sides and headsheat
• 7-gauge tailgate with integral 8-position feedgate
• 28-inch-wide main conveyer
• Other dump bodies and options available

Spreaders

304SS Stainless Steel Tailgate Spreader (pictured on the right)

• 9-inch auger diameter with both right and left-hand discharge
• Direct drive motor
• Swingaway spinner assembly
• Spreader has quick disconnect mounting pins for easy installation and removal
• Other options available

Slide in V-Box Spreader (2nd picture on the right)

• Inside seams are continuous-welded for extreme-Duty
• 10-gauge side and ends
• 7-gauge floor
• Telescopic chute is 10-gauge steel and is totally enclosed
• Conveyer is 24 inches wide with crossbars spaced 4-1/2 inches on center
• Available in mild steel and 304 stainless steel
• Capacity 4.5 yd to 15 yd
• Many sizes and options available

Medium-Duty Truck Equipment
(1-Ton to 2-Ton)

Burke Truck & Equipment, Inc. carries a variety of Medium-Duty Truck Equipment to meet your needs.

Burke Truck & Equipment, Inc. is an authorized Brand snow and Ice Equipment Dealer.

Scroll Down to view listing of Medium-Duty Truck Equipment that's available.

Plows

Sno-Way Snow Plows (pictured on the right)

Sno-Way snow plows are built to fit a wide range of both imported and domestic vehicles including small trucks, SUVs, heavy duty pickup trucks, and class V vehicles. In addition, Sno-Way offers more plow options than any other snowplow manufacturer.

Dump Bodies

Spreaders

Sno-Way Vbox Spreaders

Designed specifically for full size pickups, dump trucks, and flatbed trucks.

Sno-Way Portable Receiver Spreaders

Sno-Way Receiver Spreaders offer maximum value for every type of user. Designed with super sidewall geometry, material is literally sucked into the spinner section. We incorporate indestructible hoppers, adjustable deflectors, full shut off gates, and much more to ensure your spreader will work for every job and fit every budget.